Verst?ken mit Selentoner

2 Replies, 8100 Views

Ich habe mal irgendwo gelesen, mit Selentoner könne man dünne Negative verstärken, sodaß man sie noch auf Papier bekommt. Stimmt das? Und kann mir jemand sagen, wie das funktioniert? Verdünnung, Dauer, Endbearbeitung, wieviel man damit erreicht, Ergiebigkeit und so.

Schau doch mal in die einschlägige Literatur; jedes bessere Buch sollte was dazu drinhaben. Im Anchell/Troop z.B. gibts ein eigenes Kapitel nur zu Verstärkung/Abschwächung. Dort heißt es z.B.:

 

Zitat: 

Ansel Adams used intensification to expand roll film negatives by at least one paper grade,

or in Zone System parlance, N+1. The intensifier he used was selenium toner diluted with

water 1:2. His technique was to first re-fix the negative in plain hypo then soak the negative

in selenium toner 1:2 for 3 to 5 minutes.

To dilute the selenium, he recommended using a working strength bath of Hypo Clearing

Agent (HCA). He followed the toning bath with a second, full-strength, bath of HCA, without

selenium, and then a thorough washing.

The purpose of re-fixing the negative in plain hypo before selenium intensifi cation is to

ensure that there is no residual hardener. Hardener will cause staining in both negatives and

paper when it comes in contact with selenium. If you are confident that your negatives have

been thoroughly washed, or if you use fixer without hardener then re-fixing should not be

necessary. But when in doubt, re-fix.

The list of intensifier formulas includes uranium, silver, copper, selenium, chromium, mercuric

chloride, and mercuric iodide. Some of the formulas, such as uranium, create a high

degree of intensification but a low degree of stability. Others, such as chromium, do not intensify

nearly as well, but the image is reputedly quite stable.

 

 
 

Rezepte für verschiedenste Verstärker findest du ebenfalls dort. Auch Kodak hat mindestens fünf Rezepte für diesen Zweck veröffentlicht. Das hier ist vielleicht auch interessant für dich.

 

viel Erfolg

Nils

(Dieser Beitrag wurde zuletzt bearbeitet: 03-01-2015, 03:31 PM von AntiLynd.)
Selentoner bringt etwa eine halbe Stufe. Ich empfehle 1+10 und 5 Minuten Einwirkungszeit. Ist ganz einfach anzuwenden.
Bleibt dran, am Sucher.



--Uwe



Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste

Theme Selector